Whoa~ Here's a man who thinks like I do! Get a bigger tool! ;-) . Don't mess with Dean! (And don't get too close to the piano when he is at work!) (Thanks, Dean, for that timely tip!) ~Kendall Ross Bean -----Original Message----- From: Dean May [mailto:deanmay at pianorebuilders.com] Sent: Monday, July 07, 2008 5:45 PM To: 'Pianotech List' Subject: RE: Becket breaker? - Technique 4 inch grinder with cutting wheel. Try it, you'll like it. Dean Dean May cell 812.239.3359 PianoRebuilders.com 812.235.5272 Terre Haute IN 47802 -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Phil Bondi Sent: Monday, July 07, 2008 7:27 PM To: Pianotech List Subject: Re: Becket breaker? - Technique Porritt, David wrote: > Does no one else cut strings with a Dremel tool? I take tension down > a turn (well I did the last time I did any belly work) and then cut > the strings with the cutting wheel with a Dremel tool. Very fast! > David, I tried that. I was going through wheels like crazy. Operator error?
This PTG archive page provided courtesy of Moy Piano Service, LLC