"non" Knuckle to Jack regulation

[Scott Jackson]

Rex,
Does it look like this picture that was posted by Barbara:
https://www.moypiano.com/ptg/pianotech.php/attachments/f4/83/40/ae/Packwrnhmr.JP
G
 
Horace Greeley described how to regulate here:
https://www.moypiano.com/ptg/pianotech.php/2004-March/150452.html
 
Scott Jackson
Mt Keira, NSW, Australia. 

 

-----Original Message-----
From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of Rex Roseman
Sent: Saturday, 26 July 2008 10:58
To: 'Pianotech List'
Subject: "non" Knuckle to Jack regulation



Dear list members.

 

I am working on a piano that has the knuckle build into the hammer shank. It
consists of a ledge cut in the bottom of the shank which is then covered
with leather. This replaces the standard knuckle. My problem is what to
align the jack to as there is no center core as in a regular shank/knuckle
arrangement. Any suggestions on how to handle this would be appreciated.

 

Thanks you.

 

Rex Roseman

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080726/234c6353/attachment.html