I use a digital tape measure I got from Pianotek. Easy to read and ready to go... David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: "John Delacour" <JD at Pianomaker.co.uk> To: "Pianotech List" <pianotech at ptg.org> Received: 7/23/2008 9:31:31 PM Subject: Re: String Height Gauge >At 19:05 -0700 23/7/08, Jack Houweling wrote: >>...I simply mounted my 4 inch caliper onto a base and I used a >>machine screw to hold it secure. With a simple turn of the screw it >>can be taken apart... >>Attachment converted: Mac Mini:july 23.08 026.jpg (JPEG/«IC») (00260FC2) >>Attachment converted: ..... >VERY good idea! I didn't know there was such a thing as a 4" Vernier >caliper or I'm sure I would have stumbled on this long ago. To have >the digital read-out is so convenient in this situation. Thanks for >the tip! >JD
This PTG archive page provided courtesy of Moy Piano Service, LLC