hammers separated from bottom of molding

[Don]

Hi Kerry,

Any water based glue will work. Look on the label.

At 12:08 PM 7/10/2008 -0400, you wrote:
>Does titebond work as well as white glue?
>
>
>Kerry Kean
>Kent, Ohio
>
>-----Original Message-----
>From: Don [mailto:pianotuna at accesscomm.ca] 
>
>Hi Brian,
>
>Since it is not really a piano anyway.
>
>Apply white glue to the felt and CA glue to the molding. Clamp with your
>fingers (careful CA is quite exothermic) (double careful it bonds skin
>instantly). The moisture in the White glue will cause the CA to cure
>instantly and will provide a better bond than CA by itself. 
Regards,
Don Rose, B.Mus., A.M.U.S., A.MUS., R.P.T.
Non calor sed umor est qui nobis incommodat

mailto:pianotuna at yahoo.com	http://us.geocities.com/drpt1948/

3004 Grant Rd. REGINA, SK, S4S 5G7
306-539-0716 or 1-888-29t-uner