>...back action flange come loose. .. glued in You can glue this in place with a thin screw driver blade or other thin slat of wood by wedging it between the upstop rail and the flange and some sort ot prop on the key bed. It is tricky to get the underlever centered and you may have to flip an adjacent top flange forwards to gain access. The action would need to be out for a few hours while the glue sets. If you take out the tray, glue/clamp it in place and secure all flanges with screws if total back action replacement is not possible. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080708/fa60775b/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC