----- Original Message ----- SNIP > Opened a square grand today, and in it was a > roseweood-handled extension tuning hammer with two > long tips coming out in a "Y" from the central shaft. > Each tip had an oblong slot in the end, for the > old-style pins, but the slots were oriented 90 degrees > from one another, so that the tips could be positioned > on the pins more readily. > > Thump Well, if the tip looked anything like the one pictured below, I'm a gonna git 'em fer copyright infringement. ;-) Besides, did it have an articulated "never have to lean over a square grand again" elbow on the lever? Hmmmmm? Terry Farrell -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080119/cab5ee59/attachment-0001.html -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 48304 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20080119/cab5ee59/attachment-0001.jpe
This PTG archive page provided courtesy of Moy Piano Service, LLC