Action Rail Screws

[William R. Monroe]

Thanks to all for the responses.  Interesting learning for me.

As re: Terry's solution, I use veneer and titebond, screw it in and let it 
be.  Solved.  Each their own.

William R. Monroe



> Take two splinters of veneer and a shot of thin CA, and you'll be better 
> in the morning.   ;-)
>
> Terry Farrell
>
> ----- Original Message ----- 
>> You should always put the SAME screw back into the SAME hole in an action
>> frame, e.g.
> SNIP
>> Or am I all stripped out?
>> William R. Monroe
>
>
>