Same tool. With some difficulty I was able to narrow the blade inside the barrel so it would fit the tiny drop screw slots. I suppose it's possible that Pianotek later started making the tool with a properly narrowed blade -- hope so. Kent On Feb 20, 2008, at 6:18 PM, Alan Barnard wrote: > Nice thumb shot, Kent! > > This is the tool I have > <1.jpg> > > Is it the same one? Mine has a slotted end and a driver end, both > with "shields" around them to keep the tool from slipping off the > screw. But the collars, or shields, don't seem quite as fat, > proportionally, as the one in your picture. Anyway, I don't quite > understand what you did to modify yours, based on the picture. Some > beveling? > > Alan Barnard > Salem, MO > >
This PTG archive page provided courtesy of Moy Piano Service, LLC