mortise inserts slideshow

[Fenton Murray]

Clear DayAny particular brand/type of dado you'd recommend. My early experience with wobblers turned me off to them and I've never used them since. 
I assume you end up with a flat, machined, glue joint ready surface left behind by the dado. If that's the case I can see a future for them with me.
Thanks,
Fenton
  ----- Original Message ----- 
  From: Jude Reveley/Absolute Piano 
  To: Pianotech List 
  Sent: Tuesday, February 19, 2008 8:17 PM
  Subject: Re: mortise inserts slideshow


  Question: I know I could use a router instead of a dado blade for stock removal, but I just can't help but think of nasty tearout in that key with the dado set up. I assume you don't have that problem, do you use it simply for fast removal reasons? 
  Fenton

  Hi Fenton,

  I just recently tried out the dado for a set of balance hole inserts and found there was way less tear-out than with a router. I was very pleased; didn't even have to back the work up. You also have more options for the width by adding or subtracting dado shims.

  Nice work, Mike!

  Jude Reveley, RPT
  Absolute Piano Restoration, LLC
  Lowell, Massachusetts
  (978) 323-4545
    ----- Original Message ----- 
    From: Fenton Murray 
    To: Pianotech List 
    Sent: Tuesday, February 19, 2008 10:44 PM
    Subject: Re: mortise inserts slideshow


    Mike,
    I figured out the slide show, I didn't scroll down far enough on the page. I'll be ordering soon off your site. Great photos, thanks for your time in this. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080220/9734bfcc/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 5675 bytes
Desc: not available
Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20080220/9734bfcc/attachment.jpe