I tuned ten years for a school district with mostly Yamaha uprights. 90% of them had broken spring loops. NEVER did I once have any teacher complain about how the action worked. I told a few teachers early on, but they didn't care, and the school district didn't want to pay for it, so it didn't get done, and no one was complaining at the time I quit. les bartlett -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org]On Behalf Of Tuneyourpianonow at aol.com Sent: Saturday, April 26, 2008 7:40 PM To: pianotech at ptg.org Subject: hammer return spring string I have a customer with a nice Yamaha M2 console. The hammer return spring strings are all rotten. Do I replace all the strings? My first choice. Or, do I replace the butt flange assy. (flange, spring, string)? Doing that I will probably have to travel the flanges. My guess at time would be longer to do the strings alone. All the bushings are moving well. No verdigris. Any suggestions? Am I looking at 4 to 6 hours or more? How much does a job like this run? Thanks Steve Kessler ---------------------------------------------------------------------------- -- Need a new ride? Check out the largest site for U.S. used car listings at AOL Autos. No virus found in this outgoing message. Checked by AVG. Version: 7.5.519 / Virus Database: 269.23.4/1396 - Release Date: 4/24/2008 6:32 PM -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20080428/49ee025d/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC