Hot Hide Glue Problem

[Jon Page]

>  heat dry hide glue and adjust the hammers without breaking the joint.


When heating the shank while twisting, you are warping the shank
not softening the glue. IF this is what you are discussing in on-going
hot glue series.

But to address the original problem with the gel of the glue:
not enough water or not enough heat, more than likely the later.
-- 

Regards,

Jon Page
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20071026/eaa2933e/attachment.html