Let Piano tech know. Perhaps they will stock them. Dale The supply house plates don't fit a lot of pianos I see. The big round notch at the bottom rides too high over the stud, so when you tighten them they twist sideways, and the top edge rubs on the inside of the butt. I spoke with saintly genius machinist Robert Streicher, yesterday ( who's made parts for Ampicos and Steinways for decades- you've probably bought some ) and he said he'd make me proper ones: with a small square notch that fits the W,N& G action I'm working on. ( He made 75,000 plates for Steinway damper levers, for APSCO, so he can probably handle this. ) I'd like to make it "worth his while", and also of benefit to other techs, so please let me know if you'd like a set. ( I'll keep a list. ) ************************************** See what's new at http://www.aol.com -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20071026/5cbf0f79/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC