David, Tried it --Sometimes works great and sometimes not. As with most of these attempts at solving the vexing verdigris visitation permanent success is a crap shoot. Mr Bondi has suggested a heat gun which I have yet to try and I also picked up some brake cleaner for my next experiment . Tom Driscoll ----- Original Message ----- From: "David Love" <davidlovepianos at comcast.net> To: "'Pianotech List'" <pianotech at ptg.org> Sent: Saturday, October 20, 2007 12:20 PM Subject: Verdigris and Goof-Off > While removing some action parts with light verdigris today I had this > brainstorm to put a couple drops of Goof-Off on them to see what happened. > I was surprised to find that the loosened up almost immediately. Reading > the ingredients I found that Goof-Off contains Xylene so I tried that > which > worked almost as well. These parts were not that heavy with verdigris and > I'm wondering if anyone has any parts with heavy verdigris available that > they could try this experiment on--or has anybody tried this particular > solvent and with what success over the long term. > > David Love > davidlovepianos at comcast.net > www.davidlovepianos.com > >
This PTG archive page provided courtesy of Moy Piano Service, LLC