Maybe the photos aren't that clear. I levered out the action with straps around the brackets. The lever was a 1 1/2 x 2 1/2 of maple 4' long. Fulcrum was a 4x4 block wrapped in leather against the strectcher. I could have lifted a VW with the amount of force I used. Fenton ----- Original Message ----- From: "Fenton Murray" <fmurray at cruzio.com> To: <pianotech at ptg.org> Sent: Tuesday, March 20, 2007 5:22 PM Subject: S&S Action UNjam > See attached photos for removal of action, finally came out with damage to > hammer rail. This blood is not on my hands. Actually, I think this method of > removal could not have been better, I was able to smoothly apply several > hundred, if not over a thousand pounds of pull. I think the photos are > clear. > Fenton Murray, RPT > www.MurraysPianoTuning.com >
This PTG archive page provided courtesy of Moy Piano Service, LLC