I was going to say "go Japanese" but I see you're already there. No one does better. On 3/15/07, RicB <ricb at pianostemmer.no> wrote: > > Hi Folks > > > I'm getting ready to buy a set of really good chisels and before I do I > wanted to check with folks experienced with notching needs and see if > they have any good recommendations. So far the set I've seen that > impresses the most (from reading about them, not experience) are the > following... > > http://www.fine-tools.com/stemjap.htm#zield11 > > Any advice is welcome. > > Cheers and thanks > RicB > -- =cell 425 830 1561= -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070315/f7c7fdb4/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC