You could shoeshine it off with some medium grit then fine grit paper. That should work. Dave Stahl, RPT Dave Stahl Piano Service 650-224-3560 dstahlpiano at sbcglobal.net http://dstahlpiano.net/ -----Original Message----- From: rsanbornmorgan at yahoo.com To: pianotech at ptg.org Sent: Wed, 14 Mar 2007 7:06 AM Subject: new string broke after 3 months In December I replaced a wound string on an execrable Yamaha electric piano (definitely a PS/POS). That string broke on Sunday, and I've ordered a replacement. Checking the underside of the v-bar that terminates the speaking length, where the string broke, I found a slight burr in the metal. What can I do about that, in case that is what caused the string to break? Thanks in advance, Richard Morgan ________________________________________________________________________ AOL now offers free email to everyone. Find out more about what's free from AOL at AOL.com. -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070314/fb1deda5/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC