Wire Cannisters

[Jon Page]

>Drill two holes in the bottom of the canister 3" apart, big enough to
>accept dowels. Clamp plywood to bench, set canister on dowels, use strap
>wrench to unscrew canister top.

Good idea. But for that matter just use two screws powered into the base
from the top hole. One screw into the center hole and one an inch or so away.
-- 

Regards,

Jon Page
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070312/f48767ac/attachment.html