Hi Barbara, I do them all the time. Not a problem. I use the Spurlock method for removal and for rebushing. Debbie ----- Original Message ----- From: Barbara Richmond To: Pianotech Sent: Thursday, March 08, 2007 7:53 PM Subject: Knabe key bushings Howdy, Took a look at a 1929 Knabe grand that was rebuilt in the late 70s. Hmm. Well, I guess nice parts may have been a little more difficult to get back then... This piano has those elongated, thin balance pins. There's not a lot of wobble, but they don't fit quite the way I'd like, either. Did I read about resizing bushings by using a quick shot of steam on this list? Has anybody rebushed a set of these? I see the cauls listed on the Spurlock website & in the Pianotek catalog, so I guess somebody does them. Any bits of advice? Thanks, Barbara Richmond, RPT near Peoria, Illinois -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070308/037de1fd/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC