Damper felt replacementIndeed. Bill Spurlock has a nice instructional paper on this subject. Also, especially if the piano is a vertical, are the damper springs strong enough? Terry Farrell ----- Original Message ----- From: Jon Page To: pianotech at ptg.org Sent: Saturday, June 30, 2007 2:39 PM Subject: Damper felt replacement However, after damping, there is still a lot of 'ring' in the piano Chances are that the bass heads are not long enough for damping power and you didn't use trichord (or enough of) in the tenor. There is discussion in the archives on long bass damper heads. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070630/f2bbf468/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC