On Jun 14, 2007, at 9:17 AM, reggaepass at aol.com wrote: > Is there another way to go other than filing the hammers in the C5- > B5 octave? Hey, brother-----Yes. 1. remove the action; lay it down, support the hammers, and bang on the strike point of the hammers you want to bring up with a small hammer; bang pretty hard. 2. be JUDICIOUS with ONE drop of 3:1 acetone/lacquer solution in the middle string cut of each affected note; wait one hour; drop another SINGLE drop in the other string cuts if necessary. There's a massive difference between squirting hardener on a hammer and putting a single drop on. xoxo DA -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070614/5e031bea/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC