_____ From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Farrell Sent: June 10, 2007 2:23 AM To: Pianotech List Subject: Re: The Beauty of the Open-Faced Pinblock What are "flared out" keys? Terry Farrell In most grand pianos the centerline of the keys are perpendicular to the front of the keybed. Then, just behind the headscale, they angle off -- flare -- to one side or the other so they end up in line with the various capstans. Just before the capstan line the angle back again so that the key c/l is once more perpendicular to the front of the keyframe. In some pianos the action components (hammershanks, wippens, etc.) are not perpendicular to their respective action rails. (Certain Chickerings come to mind.) In these cases the keys generally do not have that second angle. In this case the owner wanted to fit a convention action design using Renner wippens and hammershanks. For these to be mounted in the conventional manner -- i.e., with their c/l's perpendicular to the action rails -- new keys were required. You start from the hammer strikeline and work down. The hammer strike centers are transferred to the new action rails. Action brackets are located and fitted. Action parts are mounted and aligned to the strings. The hammer strike centers also become the capstan centers once an appropriate action ratio has been developed. From here a keyset and appropriate keyframe is drawn out using the original headscale spacing and the new capstan line and a new set of keys and keyframe are made. In this case the drawing went to Rick Wheeler (Roseland Piano) who made the keyset and keyframe. Del -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070611/34743ef7/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC