Thank you, Robin, I suppose the topic of WD-40 will always be popping up. Even 25 years ago when I was in piano tech school, we were told WD-40 is NOT an option--period. This isn't new information. I hope that any newcomers to this field will make note of that. Barbara Richmond, RPT near Peoria, Illinois ----- Original Message ----- From: "Robin Stevens" <pianoman at westnet.com.au> To: "'Pianotech List'" <pianotech at ptg.org> Sent: Thursday, July 19, 2007 5:33 PM Subject: RE: WD40 >I followed a music teacher from school to school for many years who had a > bad habit of applying WD40 to every slightly sticking note he found!! In > every case the WD40 over a period of time reacted with the brass centre > pins > causing a green gunk to grow on the pin making it completely unworkable. > I > would stick with Protek. Short term fixes like this, the same as putting a > drop of machine oil on the striking point of a Hammer to soften it have a > habit of biting you on the Butt down the track. ;-(( > > Robin Stevens ARPT > South Australia > > > > -----Original Message----- > From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On > Behalf > Of David Boyce > Sent: Friday, 20 July 2007 2:42 AM > To: Pianotech List > Subject: Re: WD40 > >>I had the same experience on an old Kimball action that I tracked for a >>few >>years after application. Seemingly no residual bad effects. > >>Dean > > Well I'm glad it worked for someone else too! I guess one would only > ever > try it in the case of a probably low-grade piano where "proper" repair is > uneconomical, where in its current condition it's unplayable, and where > the > customer just doesn't have the means to replace it. > > David. >
This PTG archive page provided courtesy of Moy Piano Service, LLC