Tuning sequence question

[Joe And Penny Goss]

Hi,
I find this statement not to be true for me.
But then with My SATlll I fools it by Measuring A3  {That is usually a reading close to 1 or -1} ( after the FAC program is generated ) 
Take half the reading of how flat it is and using that reading to set the overpull.
IE. if the A3 is -31 cents flat I would raise the reading to -16 and roll over the 25% button.
Joe Goss RPT
Mother Goose Tools
imatunr at srvinet.com
www.mothergoosetools.com
  ----- Original Message ----- 
  From: ITUNEPIANO at aol.com 
  To: pianotech at ptg.org 
  Sent: Monday, July 09, 2007 7:06 PM
  Subject: Re: Tuning sequence question


  If you don't overpull the bass, then you have to tune the bass 2-3 times.  It is actually more unstable than the treble due to shelves supporting the bass bridge.  Bob





------------------------------------------------------------------------------
  See what's free at AOL.com. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070709/7907b14a/attachment.html