No wiener Joe Goss RPT Mother Goose Tools imatunr at srvinet.com www.mothergoosetools.com ----- Original Message ----- From: "Alan Barnard" <pianotuner at embarqmail.com> To: <pianotech at ptg.org> Sent: Tuesday, December 18, 2007 11:15 AM Subject: RE: ??Puzzler?? > Hm. > > Small screwdriver suggests removing dampers by unscrewing them at the monkey and bushing cloth "suggests" rebushing damper guide rail--but 1 inch seems not enough for 21 and "a drop of glue" would be spread pretty thin... > > Not a regulation issue, you say ... > > So I'm guessing you used the cloth to shim the guide rail to a slightly different angle/position. > > That's my studied, scientific, professional estimate ... or wild-assed guess, that is. > > Alan Barnard > Salem, MO > > ----- Original message ---------------------------------------- > From: "Joe And Penny Goss" <imatunr at srvinet.com> > To: Pianotech <pianotech at ptg.org> > Received: 12/18/2007 12:10:19 PM > Subject: ??Puzzler?? > > > ><G> > >Symptoms as reported by client. > >Dampers not damping. > > >Question to him: are they sticking in pairs? > >They reply yes. > >Suspect growing or loose leads will be found. > > >Arrive to work on piano ( 130 mile one way ) > >with all tools and supplys I can think to bring > >and need only a small screw driver, a drop of glue > >and an inch of bushing felt to fix the problem. > > >21 dampers were involved, none in pairs <g> > > >Some dampers would stay up and when pushed > >down would make a crusty scraping sound. > > >Nothing needed adjusting. > > >Joe Goss RPT > >Mother Goose Tools > >imatunr at srvinet.com > >www.mothergoosetools.com > > > >-- > >No virus found in this incoming message. > >Checked by AVG Free Edition. > >Version: 7.5.503 / Virus Database: 269.17.1/1183 - Release Date: 12/13/2007 9:15 > >AM
This PTG archive page provided courtesy of Moy Piano Service, LLC