Use tightbond glue, close the felt with vise grips. secure the joint by driving a small screw though the felt and into the molding, or use a wire twist tie around the hammer. Screws can be removed at next tuning if you want. Bob. ************************************** Get a sneak peek of the all-new AOL at http://discover.aol.com/memed/aolcom30tour -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20070806/3c499009/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC