Greetings, Doing a dealer tuning on a brand new Yamaha M-500 console, I found that the practice rail pedal (center pedal) moves the practice rail into position okay... however the pedal wont move to the left into the lock-on postion (slot). Upon closer examination and after playing with the adjusting tie rod the slot doesnt provide enough clearance for the pedal! The only solution I see is to remove the felt that lines the cut-out and replace it with thinner felt...it seems too thick. It measures 1/8" or better....or.. Am I overlooking some other simpler solution, as I hate to pull and sever new felt,,,I'd be redesigning the situation. Has anyone ever seen this in a brand new Yamaha?? What gives? ....or in this case... doesnt give?...In my whopping 42 months in business, I have never seen a Yamaha with "careless" work. Thanks, Julia Gottshall Reading, PA -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20061121/fff34dd6/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC