Howdy all, Whew, had a computer glitch for a while and it's good to be able to send messages again. I have taken apart this harpsichord stand, which was hardly glued together in the first place and am preparing to glue it up again. Here's my question, is there are way anyone would suggest to secure it other than just gluing it. No, I'm not talking about clamping while waiting for the glue to dry, but shooting a screw through at an angle or some other (more?) desirable woodworking procedure to make it stronger/sturdier. Thanks! Barbara Richmond, RPT near Peoria, Illinois -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20061110/f06bc414/attachment-0001.html -------------- next part -------------- A non-text attachment was scrubbed... Name: 2006_1110Harpsichordstand0035.JPG Type: image/jpeg Size: 36682 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20061110/f06bc414/attachment-0003.jpe -------------- next part -------------- A non-text attachment was scrubbed... Name: 2006_1110Harpsichordstand0036.JPG Type: image/jpeg Size: 59856 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20061110/f06bc414/attachment-0004.jpe -------------- next part -------------- A non-text attachment was scrubbed... Name: 2006_1110Harpsichordstand0037.JPG Type: image/jpeg Size: 40568 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20061110/f06bc414/attachment-0005.jpe
This PTG archive page provided courtesy of Moy Piano Service, LLC