Spell checker would not have caught that one as threw IS a word - a legitimate one at that. As to "newbee" knew Bea new bee knew bee pneu - bee?? (all air) new b?? _____ From: William Benjamin [mailto:pianoboutique at comcast.net] Sent: Monday, May 22, 2006 2:29 PM To: 'Pianotech List' Subject: RE: Stupid newbee!!! Stupid! Stupid! I had some one come in the store and just sent it without spell checking. Now that I spell check, I find newbee comes up wrong; go figure. William PIANO BOUTIQUE William Benjamin Piano Tuner Extraordinaire www.pianoboutique.biz The tuner alone, preserves the tone. _____ From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of John Fortiner Sent: Monday, May 22, 2006 4:06 PM To: 'Pianotech List' Subject: RE: Stupid newbee!!! Stupid! Stupid! "threw" as in the past tense of "throw"???? Sorry, couldn't resist John Fortiner _____ From: William Benjamin [mailto:pianoboutique at comcast.net] Sent: Monday, May 22, 2006 12:38 PM To: 'Pianotech List' Subject: RE: Stupid newbee!!! Stupid! Stupid! Yes you are getting threw. PIANO BOUTIQUE William Benjamin Piano Tuner Extraordinaire www.pianoboutique.biz The tuner alone, preserves the tone. _____ From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Samuel Choy Sent: Saturday, May 20, 2006 9:39 PM To: Pianotech List Subject: Re: Stupid newbee!!! Stupid! Stupid! Thanks to everyone for your great advice. Also, I went to the PTG meeting today and got some great advice too. Thank you everyone, also, for not rubbing my nose in it too!! Isaac, I will definitely practice before I try anything. Sam Choy ----- Original Message ----- From: Isaac <mailto:irs.pianos at earthlink.net> Sadigursky To: 'Pianotech List' <mailto:pianotech at ptg.org> Sent: Saturday, May 20, 2006 6:48 PM Subject: RE: Stupid newbee!!! Stupid! Stupid! Hi,Sam! You can call yourself Stupid if you will do it again second time..For the first time:Just call it GODD Experience.. I had done it 28 years ago,I still work on that 6+ Chickering and its fine.. Here is a simple repair technique: Drill out 31/32 hole to insert ½ Ready Made Plug from Pin Block Material,glue it,cut it flush. And here is the trick I had learned from late Dennis Nicholson,RPT.. At 1oClock area drill 7/32hole 1/8 deep so that drilled hole is half-way in the plug and half way in the old pin Block area and it works as a LOCK or CAM and prevents newly installed plug from spinning around during drilling.You dont have to wait for glue to set with this technique.This LOCKING technique was used in a lot of ship building joints in the OLD World and it works..I would recommend practicing it first on an old piece of pin block material..When I will master using my new digital camera-I will post a picture of this repair Good luck.. Isaac.. _____ From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Samuel Choy Sent: Saturday, May 20, 2006 8:09 AM To: Pianotech List Subject: Stupid newbee!!! Stupid! Stupid! Ok, I know this was a stupid thing to do and I'm glad that it was on my piano and not on someone else's. The plate bushings looked horrible, so I decided to drill them out and replace them. On one, though, I drilled too far and went about 1/2 inch into the pin block. After that happened, removed the pin block and wished there was a way to kick myself before I continued. So now I have to figure out what to do about this oversize hole I made where the pin should go. I'm hoping that the block isn't ruined, because the rest of it looks like it's in really good shape. I'm thinking about gluing a plate bushing in the large hole. That's the only thing I can think of right now. Any ideas? Please don't yell at me, I yelled at myself already. Sam Choy -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060522/5866f6de/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC