bridge top finish

[William R. Monroe]

Hi Dale,

How thick a cut of shellac are you spraying?  Do you spray (instead of
brushing or rubbing) because it's easier with your set-up, or because of the
results?

William R. Monroe

> I use several coats of sprayed on shellac.   Then I put the bridge in the
hot
> box over night.  wet sand with 600, rub  with steel wool & then rub with a
> cloth or paper towel to shine it up.   It penetrates & hardens & is easy
to make
> look good.  Notches  also get shellac and varnish.
>   Works for me
>   Dale