This piano is the "everthing connected to the bracket" type. No problem with runaway stickers or benefit in removing the keys. Action is held in place at the top by four square headed fat bolts threaded in the head to recieve bracket fastening screws. Clearance here is somewhat a problem, but the damper rod sticks out the back so far that there is no possibility of clearance except perhaps at the bassmost end of the piano. I hope I'm making some sense here. Anyway, I'm also hopeing to get a little advice on what to do. I'm thinking I may need to remove the holding bolts from the plate, move the action all the way to the left and lift out. Any suggestions? Thanks. Phil Frankenberg Chico Ca. Phil, Great suggestions from our pals on list. This is a method to hold the guide rail in place.This was mentioned on list some time ago and I forget the author. I used to use the damper head idea but like this better. Tom Driscoll RPT -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060509/0720b1b0/attachment-0001.html -------------- next part -------------- A non-text attachment was scrubbed... Name: P1010037.JPG Type: image/jpeg Size: 40388 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20060509/0720b1b0/attachment-0003.jpe -------------- next part -------------- A non-text attachment was scrubbed... Name: P1010036.JPG Type: image/jpeg Size: 38612 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20060509/0720b1b0/attachment-0004.jpe -------------- next part -------------- A non-text attachment was scrubbed... Name: P1010039.JPG Type: image/jpeg Size: 39913 bytes Desc: not available Url : https://www.moypiano.com/ptg/pianotech.php/attachments/20060509/0720b1b0/attachment-0005.jpe
This PTG archive page provided courtesy of Moy Piano Service, LLC