Fenton, Very interesting. I must say I would not have considered trimming the plate in this way. Interesting stuff. Thanks for the link. William R. Monroe ----- Original Message ----- From: "Fenton Murray" <fmurray at cruzio.com> To: <pianotech at ptg.org> Sent: Monday, March 27, 2006 9:40 AM Subject: vintage chickering plate removal Bill, Lots of pit falls the I wouldn't want to go into, but as far as pulling a tricky plate, here is how I did an old Bosey. I cut out part of the plate and part of the case. Sounds awful but it wasn't bad. See link to pics. http://www.murrayspianotuning.com/id177.htm Fenton Murray, RPT www.MurraysPianoTuning.com
This PTG archive page provided courtesy of Moy Piano Service, LLC