Hi Don, I am a little timid to ask what the pic shows. Is this the pinblock from the keybed looking up? Joe Goss RPT Mother Goose Tools imatunr at srvinet.com www.mothergoosetools.com ----- Original Message ----- From: "Don" <pianotuna at yahoo.com> To: "Pianotech List" <pianotech at ptg.org> Sent: Friday, March 17, 2006 9:28 AM Subject: Chinese based Heintzman > Hi all, > > I thought this might be interesting to technicians in general. The > instrument does have plate bushings. It is equipped with a full DamppChaser > system and bottom cover. I'm not happy with the stability. Coils have been > tapped, as well as hitch pins and bridge pins, and seating has been done at > pinblock terminations. ---------------------------------------------------------------------------- ---- > > > Regards, > Don Rose, B.Mus., A.M.U.S., A.MUS., R.P.T. > Non calor sed umor est qui nobis incommodat > > mailto:pianotuna at yahoo.com http://us.geocities.com/drpt1948/ > > 3004 Grant Rd. REGINA, SK, S4S 5G7 > 306-539-0716 or 1-888-29t-uner > ---------------------------------------------------------------------------- ---- > _______________________________________________ > Pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC