Sara If the flex and cost bothers you, check out my hammers. Joe Goss RPT Mother Goose Tools imatunr at srvinet.com www.mothergoosetools.com ----- Original Message ----- From: deanslist To: Pianotech List Sent: Tuesday, June 27, 2006 6:37 AM Subject: Re: NEWOCTAVE GLOBAL Tuning hammers.... I'll second the recommendation for Steve Fujan's levers. I'm just learning how to tune and the stiffnes of these levers is making it much easier to control the movement of the pin. I use (so far) two different tubes. The six inch tube is nice on the junker with pins that aren't incredibly tight. The nine inch tube is great on the tight tuning pins on the Pearl River. I also have one of those New Octave Global hammers - I consider it and the Randy Potter apprentice lever to be emergency equipment. The flex in the steel really bothers me. Sara Nash student -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060627/c171d99b/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC