John, I tried your method and it works great! I don't think I will be doing hard test blows anymore. The only thing that I changed was to put a notch on the end of the hammer shank so it wouldn't slip off the string. Make sense? Ron Boyd Milwaukee, Wi. -----Original Message----- From: John M. Formsma [mailto:john at formsmapiano.com] Sent: Friday, June 09, 2006 9:10 PM To: 'Pianotech List' Subject: RE: More on hearing protection Avery, I don't know if you've read the entire thread, but the whole point I'm trying to make is that it's not necessary to pound to get stability. I only mentioned pounding after using the shank to deflect the string for those pounders who might not think it works. No, I don't recommend pounding at all, but it's an extreme example to verify the effectiveness of using the hammer shank. Once that is verified, we can be comfortable in a method that is better for the hammers, the piano, and for us! I've known for years that stability can be achieved without pounding, using a firm blow only as a test blow. Now, I'm convinced I can even leave off the firm blows. (For the most part.naturally, I will continue to verify the method at least once per piano to make sure I ain't heading way off into instability land! <g>) John Formsma _____ -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060609/1b032634/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC