Hi Paul, When you have mismatched or incorrect parts, no amount of fudging will help you. Sorry to be the bearer of bad news. You have done the right things in checking the blow dip and after touch relationship. The knuckle is too large, and/or the centre pin to knuckle core is incorrect, and/or the spread of the flange screw to centre pin is incorrect. Try a variety of new shanks, and install the correct shanks. Regards Roger At 09:06 AM 7/11/2006, you wrote: >Dear Friends: > I have a Knabe baby grand that has been rebuilt/refinished with new > wippens and shanks/hammers. The problem is that that the knuckles push > the jack into the cushion as it rebounds. There's no room for the jack > to move. Even if I change the dip/blow distance, the problem is not > solved. When the key is fully depressed, you can't "wink" the jack with > your finger because it's pressed against the jack cushion in the > window. The only thing I can guess is that the knuckle needs to be moved > away from the flange, or maybe a smaller knuckle. The action feels > "squshy". The piano belongs to the store I work for, and I would like to > make suggestions to my boss as to what needs to be done. I hesitate to > recommend a whole new set of parts, but this thing isn't going to get > better without them. I'm not set up for rebuilding, and I don't do much > action replacement, so I need some feedback from you all to! help solve > this problem. Any suggestions will be appreciated. > Thanks, > Paul McCloud > San Diego > > ><mailto:pmc033 at earthlink.net>pmc033 at earthlink.net >EarthLink Revolves Around You. > -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060711/94941503/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC