Ric- You guys get all the fun ones over there! Ed -----Original Message----- >From: Ric Brekne <ricbrek@broadpark.no> >Sent: Jan 21, 2006 10:49 AM >To: pianotech <pianotech@ptg.org> >Subject: Soundboard rib question > > >Hi Ed > >Its serial number 86. Which actually puts it in the first 3 months of >production. Included below is a picture of the soundboard I took on the >day it came into my shop. Ribs run 90 degrees to the grain. The long >extra rib does not trace the bridge itself... but seems to be a kind of >support for it. I havent located it precisely.. but its close to the >bridge itself... a bit forward of it. I can try and get a picture of >the underside of the thing in the next couple days if anyone is interested. > >I dont <<know>> that the board was a compression board... I'm just >guessing based on the rib dimensions. > >Thanks >RicB > > > > > > > > >_______________________________________________ >Pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC