Electronic Pitch Source

[Joe And Penny Goss]

Looks really nice!
Addition of tension to 435 may tighten up the pins enough for them to hold
without any CA. At this point the tone of the piano may show if you could
raise it to 440.
Lube bass strings top termination point, just a drop will do ya, and under
the pressure bar where the treble strings terminate also.
Broke my oiler yesterday and used a piece of mutting felt wet with Goose
Juice to wipe the friction area.
Worked fine on a Grandma's piano. Rusty strings, 2 broken at the upper
termination before I got there. Tried to do the knotty thing but the broken
wire was too bad to use.
Joe Goss RPT
Mother Goose Tools
imatunr@srvinet.com
www.mothergoosetools.com
----- Original Message ----- 
From: "Geoff Sykes" <thetuner@ivories52.com>
To: "'Pianotech'" <pianotech@ptg.org>
Sent: Saturday, January 07, 2006 6:43 PM
Subject: RE: Electronic Pitch Source


> The easiest way would be to rename it so that the filters don't block it.
> For instance if you have a file named:
>
> doSomething.exe
>
> Rename it to doSomething.txt
>
> The filters should allow it to pass without question. Make sure you tell
us
> what the real name is supposed to be so we can rename it appropriately.
> Otherwise it will likely not run.
>
> Also, EVERYONE, seeing as this will likely be an executable file, (not
that
> Sid can't be trusted), for your own safety make sure you have virus
> protection on your machine before downloading it, opening it or running
it.
>
> -- Geoff Sykes
> -- Assoc. Los Angeles
>
>
>
> -----Original Message-----
> From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On
Behalf
> Of Sid Blum
> Sent: Saturday, January 07, 2006 5:15 PM
> To: pianotech@ptg.org
> Subject: Re: Electronic Pitch Source
>
>
> >Date: Sat, 7 Jan 2006 18:40:27 -0500
> >To: Pianotech <pianotech@ptg.org>
> >From: Sid Blum <piano@sover.net>
> >Subject: Re: Electronic Pitch Source
> >Cc:
> >Bcc:
> >
> >Newton Hunt sent me a cute little piece of software that I'd like to
> >pass along.  If the attachment doesn't make it through the filters
> >maybe someone can help show me how and where to upload it.
> >--
> >Sid Blum
> >sid@sover.net
>
>
> -- 
> Sid Blum
> sid@sover.net
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives
>
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives