Cracking the unisons

[David Love]

I'll bet that speeds up a tuning.

David Love
davidlovepianos@comcast.net 

-----Original Message-----
From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf
Of b98tu@t-online.de
Sent: Friday, January 06, 2006 6:38 PM
To: Pianotech
Subject: Re: Cracking the unisons


>Hi Bernard,

>What are "cero" crossings?

Cero crossings are the points where the amplitude of the signal crosses the 
cero level, i.e. from positive amplitude to negative and vice versa. By 
counting this crossings, one can reconstruct the frequency of the measured 
partial of the signal by dividing the sample rate with the amount of samples

between two crossings. Requires filtering of the signal before, that no 
other partial produce another cero crossing.

regards,

Bernhard


----- Original Message ----- 
From: "Don" <pianotuna@yahoo.com>
To: "Pianotech" <pianotech@ptg.org>
Sent: Friday, January 06, 2006 8:00 PM
Subject: Re: Cracking the unisons


> Hi Bernard,
>
> Perhaps then you could explain this quote (taken out of context) from your
> original post? It certain "reads" to me as if you think "firm blow" is
> required (or at least preferred).
>
>>A good aural tuner tune with a firm struck, to catch also the transient
> phase
>>of the sound at higher volumes. Low volume tuning is like not voicing the
>>left pedal, it leaves the transient phase untuned. But sometimes it may
>>happen, that the pianist also use volumes above mp...
>
> Bernhard Stopper
>
>
>
> Regards,
> Don Rose, B.Mus., A.M.U.S., A.MUS., R.P.T.
> Non calor sed umor est qui nobis incommodat
>
> mailto:pianotuna@yahoo.com http://us.geocities.com/drpt1948/
>
> 3004 Grant Rd. REGINA, SK, S4S 5G7
> 306-539-0716 or 1-888-29t-uner
>
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives 

_______________________________________________
pianotech list info: https://www.moypiano.com/resources/#archives