Parts markup

[William Benjamin]

William,

I will say that I ask for them drilled, shaped and ruffed.   I send samples
from the ends of each section and that is standard, I think.   I was quoted
$1,500 and that seems pretty expensive.   

William




PIANO BOUTIQUE
William Benjamin
Piano Tuner Extraordinaire
www.pianoboutique.biz
The tuner alone,
preserves the tone.
 
-----Original Message-----
From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf
Of William R. Monroe
Sent: Saturday, February 25, 2006 5:09 PM
To: Pianotech List
Subject: Re: Parts markup

William,

Renner, Pianotek, Brookd Ltd. etc.

Regards,
William R. Monroe


----- Original Message ----- 
From: "William Benjamin" <pianoboutique@comcast.net>
To: "'Pianotech List'" <pianotech@ptg.org>
Sent: Saturday, February 25, 2006 2:24 PM
Subject: RE: Parts markup


> I want to know where you get hammers shanks and flanges for $800.   Am I
> going to the wrong place?
>
> William
>
>
>
>
> PIANO BOUTIQUE
> William Benjamin
> Piano Tuner Extraordinaire
> www.pianoboutique.biz
> The tuner alone,
> preserves the tone.
>
> -----Original Message-----
> From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On
Behalf
> Of James Grebe
> Sent: Saturday, February 25, 2006 9:51 AM
> To: brad@bradselvespiano.com; Pianotech List
> Subject: Re: Parts markup
>
> $1600.00
> James Grebe   Piano Tuning & Repair   Member of M.P.T.
> R.P.T. of the P.T.G. for over 30 years.   "Member of the Year" in 1989
>    Creator of Handsome Hardwood Caster Cups, Piano Benches, Writing
> Instruments
> (314) 845-8282   1526 Raspberry Lane   Arnold, MO 63010
> BECOME WHAT YOU BELIEVE!
> pianoman@accessus.net
> ----- Original Message ----- 
> From: "Brad Selves Piano" <brad@bradselvespiano.com>
> To: " Pianotech Archives" <pianotech@ptg.org>
> Sent: Friday, February 24, 2006 6:27 PM
> Subject: Parts markup
>
>
> > I'd like a concensus on how much pianotechs mark up parts they purchase
to
> > do a job. For example, a set of hammers, shanks and flanges costing
> > approx.
> > $800. How much do you charge the customer for them?
> >
> > BRAD SELVES
> > Certified Piano Technician
> > Serving London & Southwestern Ontario
> > www.bradselvespiano.com <http://www.bradselvespiano.com/>
> > 519.318.2996
> >
> >
>
>
> _______________________________________________
> Pianotech list info: https://www.moypiano.com/resources/#archives
>
>
> _______________________________________________
> Pianotech list info: https://www.moypiano.com/resources/#archives
>
>


_______________________________________________
Pianotech list info: https://www.moypiano.com/resources/#archives