Hi Jon, How about a picture of the reamer? Thanks in advance. At 07:58 PM 2/8/2006 -0500, you wrote: > >Pianotech has a Balance rail hole reamer part # KCS-1B that will >>do the job. Keep your finger firmly on the bottom of the BR hole and >>ream until the tip of the reamer touches your finger tip. > I place the reamer in a hand-cranked hand drill and use the bench surface >as a stop. > This tool is inserted down through the b/r bushings. Not only does it ream >each key to uniform thickness at the hole, it excavates any debris from the >area on top of the hole. -- > Regards, > > Jon Page No virus found in this incoming message. Checked by AVG Free >Edition. Version: 7.1.375 / Virus Database: 267.15.3/254 - Release Date: >2/8/2006 Regards, Don Rose, B.Mus., A.M.U.S., A.MUS., R.P.T. Non calor sed umor est qui nobis incommodat mailto:pianotuna@yahoo.com http://us.geocities.com/drpt1948/ 3004 Grant Rd. REGINA, SK, S4S 5G7 306-539-0716 or 1-888-29t-uner
This PTG archive page provided courtesy of Moy Piano Service, LLC