Thanks for the reply, John. On 4/29/06, John Fortiner said: > Are you SURE >that the noise is coming from that area of the piano and not from higher >up?? Being certain of the location of the noise can be a BIG help in the >solution for it. As sure as I can be. I pulled everything apart except the pedal rod/pedal and checked travel and wear. I can feel the noise vibrating in the back of the pedal itself. That still doesn't mean Im right. I'll have another shot at it next week. >As to how those pedal rods are held in - I believe it is via a small drive >pin that is driven through the pedal rod socket, then through the rod and >through the other side of the socket. No set screws on any that I've worked >on. (so far).... That makes sense, I just need a special tiny pin punch to remove it? Is that perverse or what? I'll let you know if I solve it. -- ----Dave ----------------------------- Dave Doremus, RPT New Orleans ------------------------------
This PTG archive page provided courtesy of Moy Piano Service, LLC