Steinway will send or fax you a spec sheet if you ask them. David Love davidlovepianos at comcast.net -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of A440A at aol.com Sent: Monday, April 10, 2006 7:58 AM To: pianotech at ptg.org Subject: Re: Steinway hammer Bore Angles Dale writes: << I have a list with all the original bore specs that came from a stwy source. There is nothing on it remotely close to this except I believe all bass hammers are 5.5 degrees. The first tenor is probaly 10 degress. I can look tomorrow if you need to know more than this. >> Please do. thanks, Ed Foote RPT http://www.uk-piano.org/edfoote/index.html www.uk-piano.org/edfoote/well_tempered_piano.html
This PTG archive page provided courtesy of Moy Piano Service, LLC