Hello, Listees! I have a question that I want to ask about the boring angles on Steinway grands. I have a 1904 short A that does not have the original hammers on it, and the ones that are there have barely any angle (Maybe 2 or 3 Degrees). The strings are at a 15 degree angle to the stretcher. I looked up Newton Hunt's posting of published hammer boring specs in the archives, and the only bass hammer angles for S&S that I saw were 5.5 degrees for an L and B, I think. I bored a couple samples at 8, 9, and 1 at 10 degrees, and concluded that 8 would work. Any thoughts on this? I looked at a Baldwin R, next to it, and they looked to be about 10. What do you all use? Clark A. Sprague, RPT csprague4 at woh.rr.com -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060409/c80d6460/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC