Hi Julie, Typical lacquer to lacquer thinner ratios, are 3:1 for aggressive treatment, to 6:1 just to add a little sparkle. Just be very cautious, better yet, try and fine an experienced tech to supervise you on your first job. Regards Roger At 07:33 PM 4/5/2006, you wrote: >Greetings. > > I guess these questions are really elementary but, To > use laquer as a hammer hardner means that you have to thin laquer > (clear laquer, right?) with none else than ta da....laquer thinner. > Is that right? > > >Juli >Reading, PA -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060406/e1ed9047/attachment.html
This PTG archive page provided courtesy of Moy Piano Service, LLC