I believe some pianos (S&S?) have a slightly convex keyframe and slightly convex keybed, exactly to ensure solid contact all along when the keyblocks are screwed down. --Cy-- shusterpiano.com ----- Original Message ----- From: Joseph Garrett To: pianotech Sent: Wednesday, April 05, 2006 4:07 PM Subject: Bedding the key frame Quentin asked: "Yes there is a little knocking on the ends, but I cannot get a good frame regulation on the balance rail (with the knocking action) AND no knocking at all on the front rail. Nevertheless, when I screw the 2 cheek blocks, there is no knocking at all. Then, what should I do?" -------------- next part -------------- An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/20060405/47e32e0d/attachment-0001.html
This PTG archive page provided courtesy of Moy Piano Service, LLC