Jurgen, I currently use 2/0, but testing drill sizes for 1/0 and may switch in the future. 2 3/8 or 2 1/2, blued. Thanks for asking Mike > [Original Message] > From: Jurgen Goering <pianoforte@pianofortesupply.com> > To: pianotech <pianotech@ptg.org> > Date: 9/24/2005 3:01:11 PM > Subject: Tuning Pin Preferences > > Calling all technicians: I am about to start bringing in German tuning > pins of the highest quality for distribution in Canada and the US > through my business Piano Forte Supply. I will have to commit to a > large minimum order, so I want to be sure I stock sizes and finishes > that will actually sell and not leave technicians asking for the > varieties I didn't stock. > > So, I need some input from all of you out in the field. What are the > most common sizes and lengths you use? Of 10 sets you use over any > period of time, how many #2, #3, etc, as well as lengths? Are 2-1/4 > pins actually used? Do you prefer nickel plated over blued and at > what ratio? > > I am working hard to come up with some high quality supply > alternatives, and only with your input can I plan this in a way that > will be viable. > > Feel free to reply to the list or to me privately, if you wish > > Thanks for your input. > > Jurgen Goering > Piano Forte Supply > (250) 754-2440 > info@pianofortesupply.com > http://www.pianofortesupply.com
This PTG archive page provided courtesy of Moy Piano Service, LLC