This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Cheap fix. Is drill a hole through the rib so that a coarse thread gyprok screw will be free. Then run glue between rib and soundboard, put in the screw, it has an aggressive point, and grabs the soundboard, pulling it back to the rib. Let dry, remove screw, and drill through the board and install a dowel, if you want to be neat. I think I used the Scaff clamps years ago, but I found the above method better. John M. Ross Windsor, Nova Scotia, Canada jrpiano@win.eastlink.ca ----- Original Message ----- From: richard.ucci@att.net To: pianotech@ptg.org Sent: Friday, September 23, 2005 4:24 PM Subject: soundboard clamps List, Does anyone use the soundboard clamps sold by Schaff? I need to repair an old upright pulling away from ribs . Thanks, Rick Ucci/Ucci Piano ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/a2/c5/cc/f4/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC