This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment do you mean the two files glued together that clean up the bushing mort= ice? David I. Original message From: "Avery Todd" To: Pianotech Received: 9/20/2005 3:52:44 PM Subject: RE: Key Bushing Cauls David, I like his sizing cauls for use immediately after steaming out the bush= ings! Avery At 09:17 AM 9/20/05, you wrote: Spurlock Cauls are the best. Use with hide glue. Buy a whole set of b= oth intermediate and double shoulder final cauls. You need to let the = glue dry completely with the caul inserted for proper sizing. Over tim= e you can collect the various sizes. www.spurlocktools.com David Love davidlovepianos@comcast.net -----Original Message----- From: pianotech-bounces@ptg.org [ mailto:pianotech-bounces@ptg.org] On = Behalf Of Matthew Todd Sent: Tuesday, September 20, 2005 7:06 AM To: Pianotech Subject: Key Bushing Cauls I am debating about what type of cauls to order. PianoTek sells the br= ass ones in a complete set. I heard that the brass is the best, is tha= t true? It will be mighty spendy to get a complete set of those in eac= h size. Does PianoTek sell them per dozen? I am looking at the Schaff catalog and it looks like they sell the alum= inum cauls per each. Would that be okay to start out with? Maybe get = a dozen, or 20, or 30 in each size? Thanks! Matthew Nichols <nicho@zianet.com> wrote: At 01:32 AM 9/20/2005 -0400, you wrote: "urn:schemas-microsoft-com:office:smarttags"> I'm not a regular on here, Try more fiber. Regards, Guy Nichols Mere Mortal Yahoo! for Good Click here to donate to the Hurricane Katrina relief effort. ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/4a/58/8e/66/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC