This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hello all Having just returned from Italy, Lake Garda (wonderful - included Verona and Venezia) and Norfolk (delightful - I can also gaze out at the North Sea and wave to Andre Oorebeek in Holland) I am back in harness and doing my school rounds of 8-9 pianos per day. Meanwhile on the workshop front I've got to the stage in my S&S'A' when all the new strings are on and now tensioned up to about a M3 flat. I'm stripping the old damper felts, with their magenta felt backing, and contemplating the best method of trimming the new damper felts to the required oblique angle. Any ideas out there? You know what happens if you don't approach this right - you get a nasty wiggly un-acceptable cut. S&S did/does it without this. so how is it done? Regards from a sunny Sussex village Michael G.(UK) ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/7d/57/8d/b0/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC