Accu-just System

[Alan Barnard]

AND get specs and instructions, DON'T go tappin' and tuggin' willy-nilly!

Baldwin used to be helpful when contacted on this, but I don't know if they
still are, in their current iteration.

Alan Barnard
Salem, Missouri


> [Original Message]
> From: Ron Nossaman <rnossaman@cox.net>
> To: Pianotech <pianotech@ptg.org>
> Date: 10/21/2005 10:43:25 PM
> Subject: Re: Accu-just System
>
>
> > I have a few Questions about the Baldwin with the Accu-just System. I 
> > would like to know if there is a special tool for setting downbearing 
> > on Accu-just hitch pin? When adjusting do you have to release tension
of 
> > the string?
> >  
> > Jack Houweling
>
> Hi Jack.
> Time out ----- orient.
>
> There is no special tool, other than a bubble gage to directly 
> measure the bearing angle. It is not necessary or desirable to lower 
> string tension for the adjustment.
>
> Now, what are you planning on adjusting, within what circumstances, 
> and why?
>
> Ron N
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives